Category Archives: Ubiquiti

[FIRMWARE] 3.7.51.6230 for UAP/USW has been released

Hi all,

 

We’ve prepared firmware 3.7.51.6230. Please see below for the changelog and links to the firmware binaries. Still following the old release note format (for now). This has been pushed to 5.4.11, and recent 5.5.x/5.6.x.

 

Firmware changes from 3.7.49:

  • [UAP] Wireless uplink improvements.
  • [UAP] Guest mode broadcast filter improvements.
  • [UAP] Fix a memory leak.
  • [UAP] Various tweaks to improve wireless uplink function.
  • [UAP] Add jq for CLI json processing.
  • [USW] Config changes preparing for LLDP-MED and Voice VLAN.
  • [HW] Add ca-certificates package.
  • [SEC] Various security improvements.

 

Download:

Cheers,

The UniFi team

Source: UBNT

Facebooktwittergoogle_plusredditpinterestlinkedinmail

UniFi 5.4.14 Stable Candidate has been released

Notes:

  • As always, make a backup prior to upgrading.
  • Windows users must have x64 Java installed as we only support 64 bit webRTC library. Please see HERE and download the missing version (64bit offline Windows install package).
  • You cannot re-use a VLAN ID for dynamic VLAN if it is set as a static value for another SSID on the same AP. So, if I have a SSID set to use VLAN 10, I cannot use VLAN ID 10 for RADIUS controlled VLAN users as those users will not get an IP.
  • Smart Queue QoS is similar to the implementation as in EdgeOS (see HERE). Please note that DPI will not work when using Smart Queue QoS, as traffic will not be offloaded. It’s also worth noting that maximum throughput will be affected when using Smart Queue QoS, as traffic is not offloaded. There are some rough guidelines in the article linked above.
  • DFS channels can not be used for wireless uplink as of this release. Please use non-DFS channels if you need to use wireless uplink on dual band UAPs.
  • Official UniFi MIBs can be downloaded from HERE and HERE (those are 2 different files).
  • We no longer support Java version 6, it needs to be 7 or later. We recommend Java version 8.
  • Features like airtime fairness, bandsteering, load balancing and minimum RSSI are default disabled. If you need them you need to go to Settings>Site and check Enable advanced features.
  • If you previously used Google Maps for a site map, then you have to enable this feature again by adding an API key. This is done under Settings>Controller. There is a linked guide with instructions.

 

Important Notes:

  • If visiting the local management page of the UCK (its IP/hostname), it will look like the controller is not installed. This is a known issue related to a backend change. A fixed UCK firmware will be released in the future. In the meantime, just access the controller directly (at https://IP.or.hostname:8443).

 

Controller bugfixes/changes from 5.4.12:

  • Fix bug with websocket not closing properly on site switch (causing devices listed in incorrect site).
  • Improve header icon design.
  • Fix issue with controller causing too many directs (controller side fix for UNIFI-457).
  • Various security improvements.

 

Firmware changes from 3.7.47:

  • [UAP] Fix the issue which caused ZH enabled APs to be soft bricked after upgrade to 3.7.47.
  • [UAP] Backport Busybox commit to fix the issue when DHCP search domain started with a number (reported HERE).
  • [USW] Fix a typo affecting some provisioned configurations.

 

Bundled Firmware:

 

Download:

Source: UBNT
Facebooktwittergoogle_plusredditpinterestlinkedinmail

UniFi 5.3.8 Stable has been released

Introducing our latest release for UniFi wireless, routing & switching hardware.

 

How to play safe?

Make sure you always do a backup before any updates, especially if you plan to upgrade your existing installation.

 

Release Notes:

  • For people who are migrating from v3, there’re many changes to APIs and it’s not backward compatible. You may need to update the shell library (unifi_sh_api) and/or your customized portal/external portal code.
  • Windows users must have x64 Java installed as we only support 64 bit webRTC library. Please see HERE and download the missing version (64bit offline Windows install package).
  • For hotspot management console, make sure you have bookmark the URL with site ID (i.e. x66cipn3, or whatever random string is generated for that site). For example:
    https://unifi.yourdomain.com:8443/manage/hotspot/site/SITE_ID
  • For Debian/Ubuntu users, please update your APT source (see HERE).
    • unifi-beta/unifi-rapid are obsoleted. The old repo has been removed.
    • use ‘unifi5’ in your source file, instead of ‘stable’ or ‘unifi4’
  • On Linux you can now use Oracle Java instead of OpenJDK (if desired). When using Oracle Java you may need to define the JAVA_HOME location on your Debian/Ubuntu installation. To do this you need to create a default file to define the path. This method is persistent across controller upgrades. Something like the following will work for Oracle Java (change JAVA_HOME path as needed):
    echo "JAVA_HOME=/usr/lib/jvm/java-8-oracle" | sudo tee /etc/default/unifi
  • You can no longer manage/control UniFi VoIP devices from the UniFi controller. Please use the UniFi VoIP controller for UVP products. The latest release as the time of this post is found HERE.
  • You cannot re-use a VLAN ID for dynamic VLAN if it is set as a static value for another SSID on the same AP. So, if I have a SSID set to use VLAN 10, I cannot use VLAN ID 10 for RADIUS controlled VLAN users as those users will not get an IP.
  • Cloud Access feature in this release is not supported on Linux/ARMv6 architecture (for exmaple, Raspberry Pi 1). If you have problem starting controller on this platform, please remove the native library:
sudo rm /usr/lib/unifi/lib/native/Linux/armhf/libubnt_webrtc_jni.so
  • Smart Queue QoS is similar to the implementation as in EdgeOS (see HERE). Please note that DPI will not work when using Smart Queue QoS, as traffic will not be offloaded. It’s also worth noting that maximum throughput will be affected when using Smart Queue QoS, as traffic is not offloaded. There are some rough guidelines in the article linked above.
  • Do note that DFS channels can not be used for wireless uplink as of this release. Please use non-DFS channels if you need to use wireless uplink on dual band UAPs.
  • Official UniFi MIBs can be downloaded from HERE and HERE (those are 2 different files).
  • A full changelog has been attached, showing changes back to the first public release (1.2.1).

Other Notes:

  • We no longer support Java version 6, it needs to be 7 or later. We recommend Java version 8.
  • All APs will be reprovisioned on controller upgrade, which will cause a temporary outage for all connected users. Please make sure to do this after hours, or a time when it’s okay to disconnect users for several minutes.
  • Features like airtime fairness, bandsteering, load balancing and minimum RSSI are default disabled. If you need them you need to go to Settings>Site and check Enable advanced features.
  • If you previously used Google Maps for a site map, then you have to enable this feature again by adding an API key. This is done under Settings>Controller. There is a linked guide with instructions.
  • There is a known issue with binding the SSH daemon to a specific interface. A patch was missed when upgrading dropbear. This will be fixed in a future firmware. You can bind sshd to a specific IP, but you’d have to create a separate line for each device in config.properties.

 

New Features:

  • Add batch edit of APs.
  • Added memory usage and load average to AP and switch details.
  • Added the ability to config gateway, switch and AP LED on/off state.
    • Added LED config option to device General config form.
  • Added switch statistics page.
  • Added AP config copy.
  • Added AP disable option.
  • Added Hotspot 2.0 config (beta).
  • Add option to enable Automatic Uplink Failover (found under Settings>Site>Uplink Connectivity Monitor).

 

Controller Bugfixes/Changes from 5.2.9:

  • Improve webrtc connection for debug terminal.
  • Improve icons in switch diagram.
  • Improve RF RSSI graph.
  • Add timezone to cron expressions for auto-backup.
  • Fix login issue in Safari, when websocket is blocked.
  • Fix drag&drop for firewall rules.
  • Fix truncated tooltips in Preferences.
  • Fix positioning of chart tooltips.
  • Improve look of checkboxes and radio buttons in Firefox.
  • Toggle size of Map Device Markers.
  • Improve labels for radio channel config.
  • Show backup file size.
  • Add UK to countries supported by Stripe.
  • Fixed special characters in translations.
  • Added preference for disabling websocket.
  • Fixed case when there is no selected map.
  • Added bandwidth info of neighboring AP, and grey out RSSI if too old.
  • Changed property panel adopt icon to blue.
  • Improved stability of WebRTC connections.
  • Added new rfscanning state.
  • Added modal with data retention update.
  • Enabled autobackup during initial setup.
  • Added pt_PT language to hotspot portal.
  • Do not allow read-only users to create vouchers.
  • Added search functionality to site overview modal and full page.
  • Added alert count to site overview pages.
  • Show more than just “Enabled” for WLAN overrides.
  • Renamed state from “Pending approval” to “Pending adoption”.
  • Adopt button in panels use reverse and round action icon style.
  • Show backend version in controller settings.
  • Added performance improvements on device page.
  • Added check device firmware update button to settings.
  • Added the ability to define custom switch port diagrams.
  • Added disabled device state notification.
  • Fix running controller as a service on true x64 Windows system.
  • Upgrade bundled Tomcat to 7.0.70.
  • Add French to the list of languages supported by Hotspot Portal.
  • Fix DPI charts.
  • Update RADIUS password field.
  • Fix UI version.
  • Add DFS flag to channel config view.
  • Fix bps value in voucher list.
  • Add IP to Admin login event.
  • Fix positions of tooltips.
  • Add note to WLAN group legacy support.
  • Add loading spinner on Insights pages.
  • Add support for Spanish.
  • Display 0 when no devices found in invetory device carth.
  • Add Czech, German, Greek, Indonesian to the list of languages supported by Hotspot Portal.
  • Add dBm to wireless uplink details.
  • Add throughput warnings to WLAN form.
  • Deploy proper default route metrics to USG versions >=4.3.30, fixing many multi-WAN issues.
  • Add Google Map API key entry in Controller settings view.

 

Controller Bugfixes/Changes ported from 5.4.x:

  • Fix attaching Google Analytics script in older browsers.
  • Show more details in device list radio columns.
  • Improve content of health stats tooltips on Dashboard.
  • Add confirmation dialog before restoring from autobackup.
  • Improve configuration for Hotspot Social Authentication.
  • Differentiate PoE and PoE+ in switch diagram.
  • Add new topology view in maps (Beta).
  • Change Zip to Zip / Postal Code label in hotspot payment fields (for other countries than US).
  • Improve port PoE capability detection.
  • Scroll to top when property panel is opened.
  • Improve Insights/Switch Stats (use device dropdown list).
  • Allow using API only for Angular hotspot authorization.
  • Enable port mirroring for all switch ports.
  • Fix empty dropdown value on Guest Control languages list.
  • Change default value for DTIM.
  • Add speedtest interval in Settings.
  • Improve switch stats.
  • Fix scroll to switch port to account for stick title overlap.
  • Show switch fan levels.
  • Add dBm to AP wireless uplinks and downlinks tables.
  • Remove confirm restart “Cycle PoE power” option from non-PoE switches.
  • Updated older APs to use green-ringed icon.
  • Update translations (CS, DE, ES, NL, PL, ZH).
  • Add translations (SV).
  • Add advanced feature toggle to site settings.
  • Fix loading map image through WebRTC.
  • Update image maps to make it work with latest Safari and Firefox.
  • Show/hide map topology links based on devices visibility.
  • Add topology on maps.
  • Add automatic uplink failover to site settings.

 

Firmware Changes from 3.7.21/4.3.23:

  • [UAPG2] Add ip package (from iproute2).
  • [UAPG1] Upgrade driver base to 10.2 for QCA models (excludes 1st gen AC).
  • [UAPG1] Fix issue causing an open SSID when HS2.0 config provisioned to devices which don’t support it.
  • [UAP] Fix an issue with memory corruption.
  • [UAP] Fix various bugs affecting 2.4GHz.
  • [UAP] Fix a few issues with wireless uplink.
  • [UAP] Fix issue which caused EAP authentication to stop working.
  • [UAP] Fix “peer count exceeds the supported number 136” issue with VAPs using EAP.
  • [UAP] Decrease uplink failover time. Targeted for AC-M and AC-M-PRO, but may help in other uplink use cases.
  • [UAP] Fix an issue with memory corruption.
  • [UAP] Fix various bugs affecting 2.4GHz.
  • [UAP] Fix various issues with wireless uplink.
  • [UAP] Update dropbear to 2016.74.
  • [USW] Fix reboot issue (reported HERE, and probably other locations).
  • [USG] Fix unexpected reboots related to scheduling while atomic.
  • [USG] Fix stripping of extraneous quotes from DHCP leases file in clients reporting. If some of your clients in the controller show up as “hostname” rather than hostname, this fixes that.
  • [USG] Add proper handling of gateway distances.
  • [USG] Fix performance regression introduced between 4.3.15 and 4.3.16 releases.
  • [USG] Update speedtest-cli client and built-in fallback speed test server list. Fixes instances of selecting sub-optimal speed test servers leading to lower than expected results.
  • [USG] FreeRADIUS back end enhancements for coming controller UI support.

 

Bundled Firmware:

Note that the bundled firmware links for UAP and USW are HTTP as currently HTTP links are required for custom upgrade via the controller UI, or firmware upgrade via CLI. You can update the link to HTTPS if you desire, but it will not work for either of those firmware upgrade methods.

 

Download:

Facebooktwittergoogle_plusredditpinterestlinkedinmail

UniFi 5.2.7 is released

UniFi 5.2.7 is our newest official General Availability Release for UniFi wireless AP (UAP), routing (USG), and switching (USW).

 

How to play safe?

Make sure you always do a backup before any updates, especially if you plan to upgrade your existing installation.

 

Release Notes:

  • For people who are migrating from v3, there’re many changes to APIs and it’s not backward compatible. You may need to update the shell library (unifi_sh_api) and/or your customized portal/external portal code.
  • For hotspot management console, make sure you have bookmark the URL with site ID (i.e. x66cipn3, or whatever random string is generated for that site). For example:
    https://unifi.yourdomain.com:8443/manage/hotspot/site/SITE_ID
  • For Debian/Ubuntu users, please update your APT source (see HERE).
    • unifi-beta/unifi-rapid are obsoleted. The old repo has been removed.
    • use ‘unifi5’ in your source file, instead of ‘stable’ or ‘unifi4’
  • You can no longer manage/control UniFi VoIP devices from the UniFi controller. Please use the UniFi VoIP controller for UVP products. The latest release as the time of this post is found HERE.
  • You can no longer toggle the VoIP port on the USG (UGW3). It needs to be enabled prior to upgrading/using v5, otherwise you will not be able to control it. If you rely on using the VoIP port then you may want to stay on v4.8.19. Currently it can only be configured as a secondary WAN in v5, but we will be expanding the functionality so it can be used as either a secondary WAN or LAN (LAN will be fully configurable).

Other Notes:

  • Windows users must have x64 Java installed as we only support 64 bit webRTC library. Please see HERE and download the missing version (64bit offline Windows install package).
  • If you are coming from an earlier release, and aren’t familiar with the changes in v5, please see our initial release post HERE.
  • You cannot re-use a VLAN ID for dynamic VLAN if it is set as a static value for another SSID on the same AP. So, if I have a SSID set to use VLAN 10, I cannot use VLAN ID 10 for RADIUS controlled VLAN users as those users will not get an IP.
  • Cloud Access feature in this release is not supported on Linux/ARMv6 architecture (for exmaple, Raspberry Pi 1). If you have problem starting controller on this platform, please remove the native library:
sudo rm /usr/lib/unifi/lib/native/Linux/armhf/libubnt_webrtc_jni.so
  • Smart Queue QoS is similar to the implementation as in EdgeOS (see HERE). Please note that DPI will not work when using Smart Queue QoS, as traffic will not be offloaded. It’s also worth noting that maximum throughput will be affected when using Smart Queue QoS, as traffic is not offloaded. There are some rough guidelines in the article linked above.
  • Do note that DFS channels can not be used for wireless uplink as of this release. Please use non-DFS channels if you need to use wireless uplink on dual band UAPs.
  • It appears that VHT80 uplinks work on channel 36 and 149, but may not work with other channels selected (44, 153, 159). This bug has been present for a while. VHT20/40 and HT20/40 should work properly.
  • You cannot adopt USG unless it is on a newer firmware, so it’s recommended to use the firmware bundled with this release.
  • There is a known bug with RADIUS accounting in 3.7.17 on 1st gen UAPs, where it will report 4GB use upload and 4GB use download on the STOP message, regardless of actual use. This was introduced in firmware 3.7.9, and is related to the 10.2 driver merge. We will release an update in the near future to fix this. For anyone relying on RADIUS accounting, please continue to use firmware 3.7.8 or lower until further notice.
  • If your USW shows as disconnected after firmware upgrade you can perform a set-inform (similar to L3 adoption, see HERE) or you can powercycle the USW. Either method should restore the device to a connected state.

 

New Features:

  • Add Static Routes and Firewall rules (beta) in Settings.
  • Add Auto Backup in Settings.
  • Add Remember me to login page (extend session timeout to 24h).
  • Device details: Add Channel Utilization.
  • Added minimum rate and beacon control for UAPs
  • Added memory usage and load average to AP and switch details
  • Added the ability to config gateway, switch and AP LED on/off state
    • Added LED config option to device General config form
  • Added smart banner for iPhone/iPad devices.
  • Add DPI category/app/client views in Statistics.
  • Allow overriding angular Hotspot Portal files.

 

Controller Bugfixes/Changes from 5.0.7:

  • Disable Custom Upgrade when Auto Upgrade is on.
  • Fix wrong number of devices in channel occupancy graph on Dashboard.
  • Fix select maps dropdown.
  • Store less, fetch more approach to insights, alerts, events, settings, admins.
  • UI performance improvements.
  • Add configurable list of languages in Hotspot Portal.
  • Store less, fetch more approach to networks, site health, known clients and other insights data.
  • Allow admin accounts to login to hotspot as a fallback.
  • Throughput graph: display correct value of avg throughput in download tooltip.
  • Added alias config to configuration of phone property panel.
  • Fixed for printing vouchers over WebRTC.
  • Backup settings only without historical data.
  • Added latency formatting filter.
  • Added warning to confirm modal for upgrade/update.
  • Improved WebRTC handling.
  • Quick Stats: prevent displaying arrows without values.
  • Fixed “view all” for known clients and neighboring APs.
  • Map coordinates stored as floats instead of strings.
  • Added browser warning for non-Chrome/Firefox browsers.
  • Pending changes label more verbose.
  • Added warning before closing all property panels if any docked panels have changes.
  • Fix client uplink sort to account for switch port.
  • Expose SDN log level.
  • Added SV and NL languages for hotspot portal.
  • Added handling of events pushed from backend.
  • Added TURN support for debug terminal.
  • Improved RF environment.
  • Added Polish translations.
  • Fixed editing image maps.
  • Added sorting hotspot packages.
  • Fixed sorting PoE power.
  • Added RADIUS port for network configuration.
  • Added sites overview device list.
  • Added mirroring port and WLAN group ZH tooltips.
  • Transition switch port diagram between PoE and blocking icons.
  • Split switch icons into PoE into PoE+ and 24V PoE.
  • Update Debian dependency, to allow Oracle Java (this allows you to remove OpenJDK, if desired. This can save space on CK). **** see note below
  • Add UK to countries supported by Stripe,.
  • Added shorter time filter options for neighboring AP insight.
  • Fixed INFORM_ERROR state and allow adopting in this state.
  • Fixed http hostname lookup during app load.
  • Setting default autobackup expression to monthly.
  • Added preference for disabling websocket.
  • Fixed case when there is no selected map.
  • Added bandwidth info of neighboring AP, and grey out RSSI if too old.
  • Changed property panel adopt icon to blue.
  • Improved stability of WebRTC connections.
  • Added new rfscanning state.
  • Added model with data retention update.
  • Enabled autobackup during initial setup.
  • Added pt_PT language to hotspot portal.
  • Do not allow read-only users to create vouchers.
  • Added search functionality to site overview modal and full page.
  • Added alert count to site overview pages.
  • Show more than just “Enabled” for WLAN overrides.
  • Renamed state from “Pending approval” to “Pending adoption”.
  • Adopt button in panels use reverse and round action icon style.
  • Show backend version in controller settings.
  • Added performance improvements on device page.
  • Added check device firmware update button to settings.

****As stated in the note, this is just a change with the package dependencies, this does not change the init script. To properly define the JAVA_HOME on your Debian/Ubuntu installation you should create a default file to define the path. This method is persistent across controller upgrades. Something like the following will work (update JAVA_HOME path as needed):

echo "JAVA_HOME=/usr/lib/jvm/java-8-oracle" | sudo tee /etc/default/unifi

 

Firmware Changes from 3.7.5/4.3.16:

  • [UAPG2] Fix a bug with Legacy mode that left it always on, regardless of setting.
  • [UAPG2] Fix rate limiting on non-guest VAP.
  • [UAPG2] Fix LAN lockup issue with AC-Lite/LR when connected to some 100Mbps switches.
  • [UAPG2] Guest isolation (ap_bridge) update
  • [UAPG2] Add arp to busybox, previously was missing.
  • [UAPG1] Update base driver to 10.2.
  • [UAP] Merge all connectivity improvements (see HERE, HEREHERE, and HERE).
  • [UAP] Disable ATF in default config.
  • [UAP] Change default DTIM to 3.
  • [UAP] Fix client TX stats showing as double RX stats on 2.4G radio.
  • [UAP] Allow CCK for 802.11b STA.
  • [UAP] Some changes related to RADIUS controlled VLANs.
  • [UAP] Add DFS channel support for models that are approved.
  • [UAP] Further improvements to mitigate intermittent connectivity conditions.
  • [UAP] Further improvements to Apple device compatibility.
  • [UAP] Further improvements to multicast performance/packet success rate (PSR).
  • [UAP] Further fixes to HW/SW retry algorithm.
  • [UAP] Improved SNMP support, and updated TinySNMP library (2 MIB files, found HERE, and HERE).
  • [UAP] Add netconsole library.
  • [UAP] Fix for reboots in high interference areas (reported HERE).
  • [UAP] Fix resource leak from socket call (reported HERE).
  • [USW] Add backend support for LLDP-MED.
  • [USW] Change FASTPATH local telnet access to port 23, and add warning that changes are not persistent.
  • [USW] Update base to ES 1.5.0.
  • [USW] Fix bug with remote terminal triggering 100% CPU usage.
  • [USW] Fix US-8-150W flipped PoE LED after power cycle.
  • [USG] Fix OOM issue, causing frequent reboots for some users.
  • [USG] Pass some non-offloaded packets to kernel, instead of calling dev_queue_xmit directly (helps with some crashes).
  • [USG] Improve handling of L4 packets with bad checksum.
  • [USG] Disable SSH on WAN in factory default state.
  • [USG] Add netconsole support.
  • [USG] Fixes last_seen issue, where disconnected stations show as wired to USG.
  • [USG] Adjustments to handling of DHCP events, to mitigate reboots on high traffic sites.

 

Bundled Firmware:

Note that the bundled firmware links for UAP and USW are HTTP as currently HTTP links are required for custom upgrade via the controller UI, or firmware upgrade via CLI. You can update the link to HTTPS if you desire, but it will not work for either of those firmware upgrade methods.

 

Download:

Source: ubnt.com

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Ubiquiti revamps its enterprise UniFi gear

UNIFI-New-AP

In early July, Ars ran a syndicated piece from The Wirecutter on the best consumer-grade Wi-Fi extender. Ars readers as usual were quick on the comment button, and a number of folks left feedback on the article saying that even the best consumer-grade Wi-Fi extender is barely functional trash, and that if you really need to expand beyond a single access point, the way to do it is with enterprise-grade gear. Cisco gear came up a couple of times, but more than anything else Ars commenters kept bringing up Ubiquiti Networks and its UniFi line of wireless access points.

Ubiquiti has just announced a re-vamp of the UniFi wireless access point product line, with new models all featuring 802.11ac as standard. Three of the four new models are priced extremely competitively even when considered for home use (the fourth model is for educational institutions only):

UAP-AC-LITE UAP-AC-LR UAP-AC-PRO UAP-AC-EDU
RADIO 802.11ac/n/b/g/a 802.11ac/n/b/g/a 802.11ac/n/b/g/a 802.11ac/n/b/g/a
2.4GHZ MIMO 2×2 3×3 3×3 3×3
5GHZ MIMO 2×2 2×2 3×3 3×3
POWER OVER ETHERNET 24V passive 24V passive 802.3af / 802.3at 802.3at
MSRP $89 $109 $149 $399

The dead-easy configuration and extremely granular customization options are hella neat; the level of control over your WLAN and the clients on it is even better. This is the exact same system often used by small businesses or hotels when building out a large WLAN, and it even lets you customize a guest portal and generate vouchers to hand out to your friends for access (or force them to pay you $10 for using your Wi-Fi for a few hours), and it turns out that it makes a hell of a home system as well.

One thing it’s not, though, is a firewall or NAT router—so, you’ll have to bring your own router.

I have the  Unifi AP now as my home access point and love it!

Facebooktwittergoogle_plusredditpinterestlinkedinmail