How do I Enable and Disable focused inbox

Focused Inbox separates your inbox into two tabs—Focused and Other. Your most important emails are on the Focused tab while the rest remain easily accessible—but out of the way—on the Other tab.

Outlook 2016

 

Turn Focused Inbox on

  1. In Outlook 2016, select the View tab.
  2. Select Show Focused Inbox.The Focused and Other tabs will appear at the top of your mailbox. You’ll be informed about email flowing to Other, and you can switch between tabs any time to take a quick look.

 

NOTE:  Clicking on “Show Focused Inbox” a second time will disable this feature.

Change how your messages get organized

  1. From your inbox, select the Focused or Other tab, and then right-click the message you want to move.
  2. If moving from Focused to Other, choose Move to Other if you want only the selected message moved. Choose Always Move to Other if you want all future messages from the sender to be delivered to the Other tab.If moving from Other to Focused, choose Move to Focused if you want only the selected message moved. Choose Always Move to Focused if you want all future messages from the sender to be delivered to the Focused tab.

Outlook on the web

 

Turn Focused Inbox on

  1. Open Outlook on the web.
  2. Select the gear shaped icon (Upper right-side of the screen) > Display settings > Focused Inbox.
  3. Under When email is received, select Sort messages into Focused and Other. The Focused and Other tabs will appear at the top of your mailbox. You’ll be informed about email flowing to Other, and you can switch between tabs any time to take a quick look.  Select “Don’t Sort Messages” to turn off focused inbox.
  4. Click OK.

Change how your messages get organized

  1. From your inbox, select the Focused or Other tab, and then right-click the message you want to move.
  2. If moving a single message from Focused to Other, choose Move to Other inbox. Choose Always move to Other inbox if you want all future messages from the sender to be delivered to the Other tab.If moving a single message from Other to Focused, choose Move to Focused inbox. Choose Always move to Focused inbox if you want all future messages from the sender to be delivered to the Focused tab.

 

Facebooktwittergoogle_plusredditpinterestlinkedinmail

There’s a simple wonder way to make Google Docs

Look, I don’t want to waste your time here. There are more important things going on in the world. But if you use any of Google’s G Suite products, you’ll be glad you read this.

You know how every time you want to create a new Google doc or spreadsheet, you have to go into Google Drive, and then click New, and then click on what kind of file you need, and the whole time you’re just thinking about all the other, better things you could be doing with the six seconds it takes to click those clicks? Good news: You don’t have to do that anymore. Instead, just type in doc.new, or sheet.new, or slide.new, or form.new. And behold! A new file will unfold before you.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

How to setup Webmin to use SMTP remote mail server and Gmail

Webmin sends email, such as from scheduled backups or background monitoring. It also affects email sent using the Read User Mail module.

Open Webmin settings go to Webmin > Webmin Configuration and click on Sending Email.

Settings

  1. In the Mail sending options box click the option Send email using to Via SMTP to remote mail server in the input box put “smtp.gmail.com”
  2. Checkmark Use SSL encryption? click option Use port number in the input box put 465.
  3. Before the next step, you will need an application password for Webmin.
    1. Go to https://myaccount.google.com/apppasswords
    2. Under the section “Select the app and device you want to generate the app password for”.
      1. Select app pull down > Mail
      2. Select device > Other (Custom name)
      3. Give your application a logical name (Ex. Webmin-Email-Access)
      4. The next screen will have your password. Copy the password and click Done. 
  4. SMTP server authentication click option Login as Put in your Gmail email address and the password generated from Google’s application manager in the last step.
  5. For SMTP authentication method select plane.
  6. for From address for email from Webmin I selected Address and put in my Email.

Webmin version as of this post: 1.890

Facebooktwittergoogle_plusredditpinterestlinkedinmail

How to Clear Your Search History Off of Google’s Servers With the Company’s Latest Update

Google just updated Google Search to make it easier for you to review and edit what search data Google stores. The Google Search page now features a link below the search bar that will take you directly to a new data privacy hub that let’s you scroll through and delete parts of whole swaths of your search history. It also gives you easy access to “Google-wide” controls, such as tracking activity on Google’s sites and ad personalization.

See the blue shield, that is the new controls that have been added

Just to be clear, these are all controls that we could already access through Google’s account settings menu. The amount of data the company is collecting and our ability to influence it has not changed. However, for people who are newly concerned about data privacy, or simply like to delete our search history frequently, this feature makes the process quicker to perform and easier to understand.

The new security link is currently available on the web and mobile versions of the Google Search page, but in a post on its Keyword blog, Google said it planned to add similar links to the Google app on iOS and Android in “the coming weeks,” and to other apps, starting with Google Maps, in 2019.

Data privacy is on everyone’s minds. While it is not a huge advance in terms of our level of control, making it easy and obvious that protecting your data can and should be a habit is a small step in the right direction.

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Some Updates

It has been a very long time since I last posted. The last time was just after my move and I was talking about the new home network. Well, I will keep with my promise and get some more pictures and information about my network. In the meantime, I would like to get my site updated and more content to the public. Time to help my little part of the world and make a difference.

 

So stay tuned!

 

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Moved

It has been a very long time since my last blog entry. There is a very good reason, I move to a new house. With all of the headaches of packing and moving. Then the whole unpacking in a new house. I have been keeping busy. With the new house comes many opportunities to improve my home network. I will post updates as I upgrade and install the new equipment.

Till then have a great day and hope to see you around!

Facebooktwittergoogle_plusredditpinterestlinkedinmail

[FIRMWARE] 3.7.51.6230 for UAP/USW has been released

Hi all,

 

We’ve prepared firmware 3.7.51.6230. Please see below for the changelog and links to the firmware binaries. Still following the old release note format (for now). This has been pushed to 5.4.11, and recent 5.5.x/5.6.x.

 

Firmware changes from 3.7.49:

  • [UAP] Wireless uplink improvements.
  • [UAP] Guest mode broadcast filter improvements.
  • [UAP] Fix a memory leak.
  • [UAP] Various tweaks to improve wireless uplink function.
  • [UAP] Add jq for CLI json processing.
  • [USW] Config changes preparing for LLDP-MED and Voice VLAN.
  • [HW] Add ca-certificates package.
  • [SEC] Various security improvements.

 

Download:

Cheers,

The UniFi team

Source: UBNT

Facebooktwittergoogle_plusredditpinterestlinkedinmail

UniFi 5.4.14 Stable Candidate has been released

Notes:

  • As always, make a backup prior to upgrading.
  • Windows users must have x64 Java installed as we only support 64 bit webRTC library. Please see HERE and download the missing version (64bit offline Windows install package).
  • You cannot re-use a VLAN ID for dynamic VLAN if it is set as a static value for another SSID on the same AP. So, if I have a SSID set to use VLAN 10, I cannot use VLAN ID 10 for RADIUS controlled VLAN users as those users will not get an IP.
  • Smart Queue QoS is similar to the implementation as in EdgeOS (see HERE). Please note that DPI will not work when using Smart Queue QoS, as traffic will not be offloaded. It’s also worth noting that maximum throughput will be affected when using Smart Queue QoS, as traffic is not offloaded. There are some rough guidelines in the article linked above.
  • DFS channels can not be used for wireless uplink as of this release. Please use non-DFS channels if you need to use wireless uplink on dual band UAPs.
  • Official UniFi MIBs can be downloaded from HERE and HERE (those are 2 different files).
  • We no longer support Java version 6, it needs to be 7 or later. We recommend Java version 8.
  • Features like airtime fairness, bandsteering, load balancing and minimum RSSI are default disabled. If you need them you need to go to Settings>Site and check Enable advanced features.
  • If you previously used Google Maps for a site map, then you have to enable this feature again by adding an API key. This is done under Settings>Controller. There is a linked guide with instructions.

 

Important Notes:

  • If visiting the local management page of the UCK (its IP/hostname), it will look like the controller is not installed. This is a known issue related to a backend change. A fixed UCK firmware will be released in the future. In the meantime, just access the controller directly (at https://IP.or.hostname:8443).

 

Controller bugfixes/changes from 5.4.12:

  • Fix bug with websocket not closing properly on site switch (causing devices listed in incorrect site).
  • Improve header icon design.
  • Fix issue with controller causing too many directs (controller side fix for UNIFI-457).
  • Various security improvements.

 

Firmware changes from 3.7.47:

  • [UAP] Fix the issue which caused ZH enabled APs to be soft bricked after upgrade to 3.7.47.
  • [UAP] Backport Busybox commit to fix the issue when DHCP search domain started with a number (reported HERE).
  • [USW] Fix a typo affecting some provisioned configurations.

 

Bundled Firmware:

 

Download:

Source: UBNT
Facebooktwittergoogle_plusredditpinterestlinkedinmail

UniFi 5.3.8 Stable has been released

Introducing our latest release for UniFi wireless, routing & switching hardware.

 

How to play safe?

Make sure you always do a backup before any updates, especially if you plan to upgrade your existing installation.

 

Release Notes:

  • For people who are migrating from v3, there’re many changes to APIs and it’s not backward compatible. You may need to update the shell library (unifi_sh_api) and/or your customized portal/external portal code.
  • Windows users must have x64 Java installed as we only support 64 bit webRTC library. Please see HERE and download the missing version (64bit offline Windows install package).
  • For hotspot management console, make sure you have bookmark the URL with site ID (i.e. x66cipn3, or whatever random string is generated for that site). For example:
    https://unifi.yourdomain.com:8443/manage/hotspot/site/SITE_ID
  • For Debian/Ubuntu users, please update your APT source (see HERE).
    • unifi-beta/unifi-rapid are obsoleted. The old repo has been removed.
    • use ‘unifi5’ in your source file, instead of ‘stable’ or ‘unifi4’
  • On Linux you can now use Oracle Java instead of OpenJDK (if desired). When using Oracle Java you may need to define the JAVA_HOME location on your Debian/Ubuntu installation. To do this you need to create a default file to define the path. This method is persistent across controller upgrades. Something like the following will work for Oracle Java (change JAVA_HOME path as needed):
    echo "JAVA_HOME=/usr/lib/jvm/java-8-oracle" | sudo tee /etc/default/unifi
  • You can no longer manage/control UniFi VoIP devices from the UniFi controller. Please use the UniFi VoIP controller for UVP products. The latest release as the time of this post is found HERE.
  • You cannot re-use a VLAN ID for dynamic VLAN if it is set as a static value for another SSID on the same AP. So, if I have a SSID set to use VLAN 10, I cannot use VLAN ID 10 for RADIUS controlled VLAN users as those users will not get an IP.
  • Cloud Access feature in this release is not supported on Linux/ARMv6 architecture (for exmaple, Raspberry Pi 1). If you have problem starting controller on this platform, please remove the native library:
sudo rm /usr/lib/unifi/lib/native/Linux/armhf/libubnt_webrtc_jni.so
  • Smart Queue QoS is similar to the implementation as in EdgeOS (see HERE). Please note that DPI will not work when using Smart Queue QoS, as traffic will not be offloaded. It’s also worth noting that maximum throughput will be affected when using Smart Queue QoS, as traffic is not offloaded. There are some rough guidelines in the article linked above.
  • Do note that DFS channels can not be used for wireless uplink as of this release. Please use non-DFS channels if you need to use wireless uplink on dual band UAPs.
  • Official UniFi MIBs can be downloaded from HERE and HERE (those are 2 different files).
  • A full changelog has been attached, showing changes back to the first public release (1.2.1).

Other Notes:

  • We no longer support Java version 6, it needs to be 7 or later. We recommend Java version 8.
  • All APs will be reprovisioned on controller upgrade, which will cause a temporary outage for all connected users. Please make sure to do this after hours, or a time when it’s okay to disconnect users for several minutes.
  • Features like airtime fairness, bandsteering, load balancing and minimum RSSI are default disabled. If you need them you need to go to Settings>Site and check Enable advanced features.
  • If you previously used Google Maps for a site map, then you have to enable this feature again by adding an API key. This is done under Settings>Controller. There is a linked guide with instructions.
  • There is a known issue with binding the SSH daemon to a specific interface. A patch was missed when upgrading dropbear. This will be fixed in a future firmware. You can bind sshd to a specific IP, but you’d have to create a separate line for each device in config.properties.

 

New Features:

  • Add batch edit of APs.
  • Added memory usage and load average to AP and switch details.
  • Added the ability to config gateway, switch and AP LED on/off state.
    • Added LED config option to device General config form.
  • Added switch statistics page.
  • Added AP config copy.
  • Added AP disable option.
  • Added Hotspot 2.0 config (beta).
  • Add option to enable Automatic Uplink Failover (found under Settings>Site>Uplink Connectivity Monitor).

 

Controller Bugfixes/Changes from 5.2.9:

  • Improve webrtc connection for debug terminal.
  • Improve icons in switch diagram.
  • Improve RF RSSI graph.
  • Add timezone to cron expressions for auto-backup.
  • Fix login issue in Safari, when websocket is blocked.
  • Fix drag&drop for firewall rules.
  • Fix truncated tooltips in Preferences.
  • Fix positioning of chart tooltips.
  • Improve look of checkboxes and radio buttons in Firefox.
  • Toggle size of Map Device Markers.
  • Improve labels for radio channel config.
  • Show backup file size.
  • Add UK to countries supported by Stripe.
  • Fixed special characters in translations.
  • Added preference for disabling websocket.
  • Fixed case when there is no selected map.
  • Added bandwidth info of neighboring AP, and grey out RSSI if too old.
  • Changed property panel adopt icon to blue.
  • Improved stability of WebRTC connections.
  • Added new rfscanning state.
  • Added modal with data retention update.
  • Enabled autobackup during initial setup.
  • Added pt_PT language to hotspot portal.
  • Do not allow read-only users to create vouchers.
  • Added search functionality to site overview modal and full page.
  • Added alert count to site overview pages.
  • Show more than just “Enabled” for WLAN overrides.
  • Renamed state from “Pending approval” to “Pending adoption”.
  • Adopt button in panels use reverse and round action icon style.
  • Show backend version in controller settings.
  • Added performance improvements on device page.
  • Added check device firmware update button to settings.
  • Added the ability to define custom switch port diagrams.
  • Added disabled device state notification.
  • Fix running controller as a service on true x64 Windows system.
  • Upgrade bundled Tomcat to 7.0.70.
  • Add French to the list of languages supported by Hotspot Portal.
  • Fix DPI charts.
  • Update RADIUS password field.
  • Fix UI version.
  • Add DFS flag to channel config view.
  • Fix bps value in voucher list.
  • Add IP to Admin login event.
  • Fix positions of tooltips.
  • Add note to WLAN group legacy support.
  • Add loading spinner on Insights pages.
  • Add support for Spanish.
  • Display 0 when no devices found in invetory device carth.
  • Add Czech, German, Greek, Indonesian to the list of languages supported by Hotspot Portal.
  • Add dBm to wireless uplink details.
  • Add throughput warnings to WLAN form.
  • Deploy proper default route metrics to USG versions >=4.3.30, fixing many multi-WAN issues.
  • Add Google Map API key entry in Controller settings view.

 

Controller Bugfixes/Changes ported from 5.4.x:

  • Fix attaching Google Analytics script in older browsers.
  • Show more details in device list radio columns.
  • Improve content of health stats tooltips on Dashboard.
  • Add confirmation dialog before restoring from autobackup.
  • Improve configuration for Hotspot Social Authentication.
  • Differentiate PoE and PoE+ in switch diagram.
  • Add new topology view in maps (Beta).
  • Change Zip to Zip / Postal Code label in hotspot payment fields (for other countries than US).
  • Improve port PoE capability detection.
  • Scroll to top when property panel is opened.
  • Improve Insights/Switch Stats (use device dropdown list).
  • Allow using API only for Angular hotspot authorization.
  • Enable port mirroring for all switch ports.
  • Fix empty dropdown value on Guest Control languages list.
  • Change default value for DTIM.
  • Add speedtest interval in Settings.
  • Improve switch stats.
  • Fix scroll to switch port to account for stick title overlap.
  • Show switch fan levels.
  • Add dBm to AP wireless uplinks and downlinks tables.
  • Remove confirm restart “Cycle PoE power” option from non-PoE switches.
  • Updated older APs to use green-ringed icon.
  • Update translations (CS, DE, ES, NL, PL, ZH).
  • Add translations (SV).
  • Add advanced feature toggle to site settings.
  • Fix loading map image through WebRTC.
  • Update image maps to make it work with latest Safari and Firefox.
  • Show/hide map topology links based on devices visibility.
  • Add topology on maps.
  • Add automatic uplink failover to site settings.

 

Firmware Changes from 3.7.21/4.3.23:

  • [UAPG2] Add ip package (from iproute2).
  • [UAPG1] Upgrade driver base to 10.2 for QCA models (excludes 1st gen AC).
  • [UAPG1] Fix issue causing an open SSID when HS2.0 config provisioned to devices which don’t support it.
  • [UAP] Fix an issue with memory corruption.
  • [UAP] Fix various bugs affecting 2.4GHz.
  • [UAP] Fix a few issues with wireless uplink.
  • [UAP] Fix issue which caused EAP authentication to stop working.
  • [UAP] Fix “peer count exceeds the supported number 136” issue with VAPs using EAP.
  • [UAP] Decrease uplink failover time. Targeted for AC-M and AC-M-PRO, but may help in other uplink use cases.
  • [UAP] Fix an issue with memory corruption.
  • [UAP] Fix various bugs affecting 2.4GHz.
  • [UAP] Fix various issues with wireless uplink.
  • [UAP] Update dropbear to 2016.74.
  • [USW] Fix reboot issue (reported HERE, and probably other locations).
  • [USG] Fix unexpected reboots related to scheduling while atomic.
  • [USG] Fix stripping of extraneous quotes from DHCP leases file in clients reporting. If some of your clients in the controller show up as “hostname” rather than hostname, this fixes that.
  • [USG] Add proper handling of gateway distances.
  • [USG] Fix performance regression introduced between 4.3.15 and 4.3.16 releases.
  • [USG] Update speedtest-cli client and built-in fallback speed test server list. Fixes instances of selecting sub-optimal speed test servers leading to lower than expected results.
  • [USG] FreeRADIUS back end enhancements for coming controller UI support.

 

Bundled Firmware:

Note that the bundled firmware links for UAP and USW are HTTP as currently HTTP links are required for custom upgrade via the controller UI, or firmware upgrade via CLI. You can update the link to HTTPS if you desire, but it will not work for either of those firmware upgrade methods.

 

Download:

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Thousands of xHamster login credentials surface online

Members of the porn site xHamster should be changing their passwords today after a set of nearly 380,000 usernames, emails and poorly hashed passwords appeared online.

The subscription-only breach notification site LeakBase has published the set of login credentials, which Motherboard reports were being traded online. It’s not clear exactly where the database originated, but it contains information for only a small subset of xHamster’s 12 million registered users. While xHamster doesn’t require viewers to register with the site, those who do can comment and make video playlists.

Still, the leaked information has the potential to embarrass users — several of the accounts are linked to U.S. Army and other government email addresses. If xHamster’s subscribers reused their passwords on other sites, their accounts on those sites are at risk of compromise, as well.

“The passwords of all xHamster users are properly encrypted, so it is almost impossible to hack them. Thus, all the passwords are safe and the users data secured,” an xHamster spokesperson told Motherboard.

But according to LeakBase,  the passwords were hashed with the MD5 algorithm, which is considered insecure. “MD5 hashes are trivial and easy to crack,” according to LeakBase. “The fact they think the hashes are secure is a blatant example of the faulty security placed in companies even to this day.”

Facebooktwittergoogle_plusredditpinterestlinkedinmail